Saturn49 Author

Turns out not all the information is available. GCAP.39 doesn't have RX/TX Power nor the primary/secondary frequencies. I could probably get the primary and secondary frequencies from somewhere but not sure where the get the power from.



Really the 2nd channel should be a separate graph, as they are centered on different frequencies. Also, the two frequencies should be displayed somewhere.


Time is more like 1.5 second per mocap command, total of 13 seconds for everything with a 5-node setup.


/cmd.sh?GCAP.39 returns everything in 3.5 seconds rather than 3.5 seconds for each individual mocap node status command